This is going to be a 9' version of the
10' egg with the blue swirl I made myself last year.
These old rescue boards are not quite wide enough
to fit a 23" wide board into.
So I had to add 2" to the width.
I purchased some 1" thick foam sheets,
cut them out to fit either side of the centre ply stringer
that had been cut to the exact rocker and thickness
that I wanted.
This new stringer was then glued into the blank.
After a couple of hours mowing all
the excess foam away.
I was ready to mark out the outline.
Dimentions and the templates used.
Ready for some glass.
Bottom lam down.
No comments:
Post a Comment