Monday, July 1, 2013


The inbetweener.
The one in the middle
is yet to hit the water.
8' 9' and 10'
The trilogy is complete.

Nose's from the left template.
Tails from the template on the right.
The rest of the curves were made up from other 60's templates.
Rolled bottoms.
Pinched rails.
Wide points fwd of centre.
Fins well fwd with plenty of flex.

Sunday, June 23, 2013


This is going to be a 9' version of the
10' egg with the blue swirl I made myself last year.

These old rescue boards are not quite wide enough
to fit a 23" wide board into.
So I had to add 2" to the width.

I purchased some 1" thick foam sheets, 
cut them out to fit either side of the centre ply stringer
that had been cut to the exact rocker and thickness
that I wanted.
This new stringer was then glued into the blank.

After a couple of hours mowing all
the excess foam away.
I was ready to mark out the outline.

Dimentions and the templates used.

Ready for some glass.

Bottom lam down.